Fire Detector Carbon Monoxide Alarm With Digital LCD Display And LED Index Light

Product Details:
Place of Origin: China
Brand Name: ARIZA
Certification: CE ROHS
Model Number: JKD-C620
Payment & Shipping Terms:
Minimum Order Quantity: 500PCS
Price: 11$-14$
Packaging Details: Qty:50pcs/ctn Size:39.5*34*32.5cm G.W:10kg/ctn
Delivery Time: 7-15 days
Payment Terms: T/T, Western Union
Supply Ability: 80000 pcs/month
Specifications Product Description Request A Quote
Product Name: Fire Detector Carbon Monoxide Alarm
Product Size: 106*37.5mm
Max Lifetime: 7 Years
Alarm Volume: >85 DB(A) At 1 Meters
Alarm Current: Less Than 70mA
Standby Current: Less Than 10uA
Low Battery: Less Than 3.6V
Supply Voltage: DC4.5V(3×1.5V DC PKCELL AA Battery)
Material: ABS Fireproof Material
Comply To Standard: EN50291-1:2010+AI:2012
High Light:

Fireproof ABS Smoke Alarm Detector


ABS Fire Carbon Monoxide Alarm


85dB Fire Carbon Monoxide Alarm

Product Description

Fire Detector Carbon Monoxide Alarm With Digital LCD Display And LED Index Light
Product Introduction
Carbon Monoxide Detector(CO detector), use of high quality electrochemical sensors, combined with advanced electronic technology and sophisticated technology made of a stable work, long life and other advantages; can be placed on the ceiling or wall mount and other installation methods, simple installation, easy to use; Where carbon monoxide gas is present, once the concentration of carbon monoxide gas reaches the alarm setting value, the detector will emit an audible and visual alarm signal to remind you to quickly take effective measures to effectively avoid the occurrence of fire, explosion, suffocation, death and other malignancies.
WARNING: Exceeding the temperature and humidity allowable range may reduce or lose the
detection function.



Product name

Fire Detector Carbon Monoxide Alarm With Digital LCD Display And LED Index Light

Alarm current

Less than 70mA

Product size


Alarm Volume

>85 dB(A) at 3 meters

Standby current

Less than 10uA

Supply voltage

DC4.5V(3×1.5V DC PKCELL AA Battery)

Low Battery

Less than 3.6V

Alarm Method

Sound,Lighting Alarm

Max lifetime


Comply to Standard



(1) The positive and negative poles of the battery are correctly inserted into the detector, the buzzer beeps, and the detector starts to warm up for 40s. The LCD screen displays the countdown, and the detector has no detection function at this time; after 40s, the detector enters the normal monitoring state, and the LCD screen is normally closed. When the measured value of the measured gas in the air is greater than 20×10-6, the LCD displays the concentration of the measured gas in the environment in real time.

(2) When the concentration of the measured gas in the environment reaches the alarm setting value, the detector will send out an audible and visual alarm indication.

(3) The green power indicator flashes once every 35 seconds, indicating that the detector is working normally.

(4) Red alarm indicator. When the detector enters the alarm state, the red alarm indicator flashes quickly and the buzzer sounds. The alarm cycle of the alarm signal is 4 cycles, each cycle is 100ms on/100ms off. Then turn off for 2 seconds until the CO concentration drops below the alarm setting value.

(5) This CO alarm has an automatic self-checking function to detect hardware failures. In normal standby mode, self-checking is performed every 1 minute.
Fire Detector Carbon Monoxide Alarm With Digital LCD Display And LED Index Light 0

How To Install The Co Alarm
This CO alarm is powered by three LR6 AA batteries and requires no additional wiring. Make sure the alarm can be heard from all sleeping areas or place several alarms.Install the alarm in places easy to test and operate and to replace batteries. At the time of fixing the alarm on the wall, the installation height must be over 1.5m and 0.3m lower than the ceiling, with 1.5m away from room corners, wall edges and large furniture.

Fire Detector Carbon Monoxide Alarm With Digital LCD Display And LED Index Light 1

Wall Mounting Installation Steps
1)Having established the mounting location ensure that there is no electrical wiring or pipe work in the area adjacent to the mounting surface.
2)Mark the two mounting hole locations in a wall 5.5cm (2.165in) and drill holes in the marked position. Insert wall plugs into the holes.
3)Lock the mounting bracket with the screws. Tighten the screws properly.
4)Insert three AA batteries in the battery compartment with correct polarity mark on the rear of the detector. After a beep, close the battery cover, and then test whether the alarm is functioning properly by press the “TEST” button on the flank of the detector to make sure it is normal functioning.
5)Clip in the alarm into the mounting bracket.
CAUTION: for safety of the user the CO alarm cannot be mounted without its batteries. When replace the battery, test the alarm to make sure it is normal functioning.
Package includes
1 × Carbon monoxide alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual


Q:How about the quality of Carbon Monoxide Detector Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.

Recommended Products
Get in touch with us
Contact Person : Miss. Alisa
Tel : 18822844502
Characters Remaining(20/3000)